HL7 FHIR Implementation Guide: Rwanda HIV
0.1.0 - STU1 International flag

HL7 FHIR Implementation Guide: Rwanda HIV, published by Jembi Health Systems. This is not an authorized publication; it is the continuous build for version 0.1.0). This version is based on the current content of https://github.com/openhie/Rwanda-HIV and changes regularly. See the Directory of published versions

Resource Profile: HIVPractitioner - Detailed Descriptions

Active as of 2023-09-15

Definitions for the hiv-practitioner resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Practitioner
2. Practitioner.extension
Control1..?
SlicingThis element introduces a set of slices on Practitioner.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: , and can be differentiated using the following discriminators:
  • value @ url
4. Practitioner.extension:ClinicianUserIndex
Slice NameClinicianUserIndex
Control1..1
TypeExtension(Clinician User Index) (Extension Type: integer)
6. Practitioner.name
Control0..1
Must Supporttrue
8. Practitioner.name.family
Control1..?
10. Practitioner.name.given
Control1..?
12. Practitioner.telecom
14. Practitioner.telecom.system
16. Practitioner.telecom.system.value
Pattern Valuephone

Guidance on how to interpret the contents of this table can be found here

0. Practitioner
Definition

A person who is directly or indirectly involved in the provisioning of healthcare or related services.

ShortA person with a formal responsibility in the provisioning of healthcare or related services
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Practitioner.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Practitioner.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. Practitioner.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control10..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Practitioner.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: , and can be differentiated using the following discriminators:
  • value @ url
8. Practitioner.extension:ClinicianUserIndex
Slice NameClinicianUserIndex
Definition

The user index for the person who is requesting or performing the service request.

ShortClinician User Index
Control1..1
TypeExtension(Clinician User Index) (Extension Type: integer)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Practitioner.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Practitioner.active
Definition

Whether this practitioner's record is in active use.

ShortWhether this practitioner's record is in active use
Comments

If the practitioner is not in use by one organization, then it should mark the period on the PractitonerRole with an end date (even if they are active) as they may be active in another role.

Control0..1
Typeboolean
Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

Need to be able to mark a practitioner record as not to be used because it was created in error.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Practitioner.name
Definition

The name(s) associated with the practitioner.

ShortThe name(s) associated with the practitioner
Comments

The selection of the use property should ensure that there is a single usual name specified, and others use the nickname (alias), old, or other values as appropriate.

In general, select the value to be used in the ResourceReference.display based on this:

  1. There is more than 1 name
  2. Use = usual
  3. Period is current to the date of the usage
  4. Use = official
  5. Other order as decided by internal business rules.
Control0..1*
TypeHumanName
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

The name(s) that a Practitioner is known by. Where there are multiple, the name that the practitioner is usually known as should be used in the display.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Practitioner.name.use
Definition

Identifies the purpose for this name.

Shortusual | official | temp | nickname | anonymous | old | maiden
Comments

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from NameUsehttp://hl7.org/fhir/ValueSet/name-use|5.0.0

The use of a human name.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate name for a particular context of use to be selected from among a set of names.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Practitioner.name.family
Definition

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

ShortFamily name (often called 'Surname')
Comments

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate Namessurname
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Practitioner.name.given
Definition

Given name.

ShortGiven names (not always 'first'). Includes middle names
Comments

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

Control10..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate Namesfirst name, middle name
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Practitioner
Definition

A person who is directly or indirectly involved in the provisioning of healthcare or related services.

ShortA person with a formal responsibility in the provisioning of healthcare or related services
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Practitioner.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

Control0..1
Typeid
Is Modifierfalse
Must Supportfalse
Summarytrue
4. Practitioner.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Practitioner.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Practitioner.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHALL be taken from AllLanguages: IETF language tag for a human language
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Practitioner.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
This element is affected by the following invariants: dom-6
TypeNarrative
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Practitioner.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. Practitioner.extension
Definition

An Extension

ShortExtension
Control1..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Practitioner.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: , and can be differentiated using the following discriminators:
  • value @ url
16. Practitioner.extension:ClinicianUserIndex
Slice NameClinicianUserIndex
Definition

The user index for the person who is requesting or performing the service request.

ShortClinician User Index
Control1..1
TypeExtension(Clinician User Index) (Extension Type: integer)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Practitioner.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. Practitioner.identifier
Definition

An identifier that applies to this person in this role.

ShortAn identifier for the person as this agent
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

Often, specific identities are assigned for the agent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Practitioner.active
Definition

Whether this practitioner's record is in active use.

ShortWhether this practitioner's record is in active use
Comments

If the practitioner is not in use by one organization, then it should mark the period on the PractitonerRole with an end date (even if they are active) as they may be active in another role.

Control0..1
Typeboolean
Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

Need to be able to mark a practitioner record as not to be used because it was created in error.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Practitioner.name
Definition

The name(s) associated with the practitioner.

ShortThe name(s) associated with the practitioner
Comments

The selection of the use property should ensure that there is a single usual name specified, and others use the nickname (alias), old, or other values as appropriate.

Control0..1
TypeHumanName
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

The name(s) that a Practitioner is known by. Where there are multiple, the name that the practitioner is usually known as should be used in the display.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Practitioner.name.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
28. Practitioner.name.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Practitioner.name.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: , and can be differentiated using the following discriminators:
  • value @ url
30. Practitioner.name.use
Definition

Identifies the purpose for this name.

Shortusual | official | temp | nickname | anonymous | old | maiden
Comments

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from NameUse: The use of a human name.
Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate name for a particular context of use to be selected from among a set of names.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Practitioner.name.text
Definition

Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

ShortText representation of the full name
Comments

Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

A renderable, unencoded form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Practitioner.name.family
Definition

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

ShortFamily name (often called 'Surname')
Comments

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate Namessurname
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Practitioner.name.given
Definition

Given name.

ShortGiven names (not always 'first'). Includes middle names
Comments

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

Control1..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate Namesfirst name, middle name
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Practitioner.name.prefix
Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

ShortParts that come before the name
Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Practitioner.name.suffix
Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

ShortParts that come after the name
Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Practitioner.name.period
Definition

Indicates the period of time when this name was valid for the named person.

ShortTime period when name was/is in use
Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Requirements

Allows names to be placed in historical context.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Practitioner.telecom
Definition

A contact detail for the practitioner, e.g. a telephone number or an email address.

ShortA contact detail for the practitioner (that apply to all roles)
Comments

Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and to help with identification. These typically will have home numbers, or mobile numbers that are not role specific.

Control0..*
TypeContactPoint
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

Need to know how to reach a practitioner independent to any roles the practitioner may have.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Practitioner.telecom.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
48. Practitioner.telecom.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Practitioner.telecom.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: , and can be differentiated using the following discriminators:
  • value @ url
50. Practitioner.telecom.system
Definition

Telecommunications form for contact point - what communications system is required to make use of the contact.

Shortphone | fax | email | pager | url | sms | other
Control0..1
This element is affected by the following invariants: cpt-2
BindingThe codes SHALL be taken from ContactPointSystem: Telecommunications form for contact point.
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Practitioner.telecom.system.id
Definition

unique id for the element within a resource (for internal references)

Shortxml:id (or equivalent in JSON)
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
54. Practitioner.telecom.system.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
56. Practitioner.telecom.system.value
Definition

Primitive value for code

ShortPrimitive value for code
Control0..1
Typecode
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Pattern Valuephone
58. Practitioner.telecom.value
Definition

The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

ShortThe actual contact point details
Comments

Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

Control0..1
This element is affected by the following invariants: cpt-2
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to support legacy numbers that are not in a tightly controlled format.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. Practitioner.telecom.use
Definition

Identifies the purpose for the contact point.

Shorthome | work | temp | old | mobile - purpose of this contact point
Comments

Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from ContactPointUse: Use of contact point.
Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. Practitioner.telecom.rank
Definition

Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

ShortSpecify preferred order of use (1 = highest)
Comments

Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

Control0..1
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. Practitioner.telecom.period
Definition

Time period when the contact point was/is in use.

ShortTime period when the contact point was/is in use
Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Practitioner.gender
Definition

Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes.

Shortmale | female | other | unknown
Control0..1
BindingThe codes SHALL be taken from AdministrativeGender: The gender of a person used for administrative purposes.
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

Needed to address the person correctly.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Practitioner.birthDate
Definition

The date of birth for the practitioner.

ShortThe date on which the practitioner was born
Control0..1
Typedate
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

Needed for identification.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Practitioner.deceased[x]
Definition

Indicates if the practitioner is deceased or not.

ShortIndicates if the practitioner is deceased or not
Comments

If there's no value in the instance, it means there is no statement on whether or not the practitioner is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

Control0..1
TypeChoice of: boolean, dateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Practitioner.address
Definition

Address(es) of the practitioner that are not role specific (typically home address). Work addresses are not typically entered in this property as they are usually role dependent.

ShortAddress(es) of the practitioner that are not role specific (typically home address)
Comments

The PractitionerRole does not have an address value on it, as it is expected that the location property be used for this purpose (which has an address).

Control0..*
TypeAddress
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

The home/mailing address of the practitioner is often required for employee administration purposes, and also for some rostering services where the start point (practitioners home) can be used in calculations.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Practitioner.photo
Definition

Image of the person.

ShortImage of the person
Control0..*
TypeAttachment
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

Many EHR systems have the capability to capture an image of patients and personnel. Fits with newer social media usage too.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Practitioner.qualification
Definition

The official qualifications, certifications, accreditations, training, licenses (and other types of educations/skills/capabilities) that authorize or otherwise pertain to the provision of care by the practitioner.

ShortQualifications, certifications, accreditations, licenses, training, etc. pertaining to the provision of care
Comments

The PractitionerRole.specialty defines the functional role that they are practicing at a given organization or location. Those specialties may or might not require a qualification, and are not defined on the practitioner.

Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. Practitioner.qualification.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
80. Practitioner.qualification.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
82. Practitioner.qualification.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
84. Practitioner.qualification.identifier
Definition

An identifier that applies to this person's qualification.

ShortAn identifier for this qualification for the practitioner
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

Often, specific identities are assigned for the qualification.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. Practitioner.qualification.code
Definition

Coded representation of the qualification.

ShortCoded representation of the qualification
Control1..1
BindingFor example codes, see hl7VS-degreeLicenseCertificate: Specific qualification the practitioner has to provide a service.
TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. Practitioner.qualification.period
Definition

Period during which the qualification is valid.

ShortPeriod during which the qualification is valid
Control0..1
TypePeriod
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

Qualifications are often for a limited period of time, and can be revoked.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Practitioner.qualification.issuer
Definition

Organization that regulates and issues the qualification.

ShortOrganization that regulates and issues the qualification
Control0..1
TypeReference(Organization)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. Practitioner.communication
Definition

A language which may be used to communicate with the practitioner, often for correspondence/administrative purposes.

ShortA language which may be used to communicate with the practitioner
Comments

If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Practitioner.Communication associations.

Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. Practitioner.communication.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
96. Practitioner.communication.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
98. Practitioner.communication.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
100. Practitioner.communication.language
Definition

The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-AU" for Australian English.

ShortThe language code used to communicate with the practitioner
Comments

The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

Control1..1
BindingThe codes SHALL be taken from AllLanguages: IETF language tag for a human language
TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. Practitioner.communication.preferred
Definition

Indicates whether or not the person prefers this language (over other languages he masters up a certain level).

ShortLanguage preference indicator
Comments

This language is specifically identified for communicating directly with the practitioner (typically un-related to patient communications).

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Requirements

People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))